Embedded Files
🔻 YC-TF2 /Single Sided Cutting Boring Moulding Machine
🔻 YC-TF2 /Single Sided Cutting Boring Moulding Machine
YC-TF2
Especially ideal for producing tenons for door frame, picture frame, table top frame and cabinet etc. Also ideal for producing 45° angular tenons.
Right and left tenons are accomplished at a tie.
Outstanding Features:
TF2: Right and left tenons are accomplished at a time.
The machine employs a PLC control for easy operation and smooth motion sequence.
Foot Switch controls motion cycle.
Combine three functions in one;cutting,moulding and boring.
Table surface is equipped with a miter gauge for bevel moulding.
Entire motions are actuated by air/hydraulic combination cylinders,providing fast, stable and smooth motions.
Table tilts 30˚ front downward.
The table support is fitted with oilless bushings.
45° Miter Fence
The table is equipped with a 45°miter fence, allowing for cutting, boring and moulding operations. Right and left 45°angular tenons can be accomplished at a time.
Air Clamp
The workpiece is clamped by air cylinder for convenient and fart clamping and unclamping.
Variable Workpiece Feed Speed
The machine employs two speed regulator knobs to adjust the table feed forward and backward speeds. permitting workpiece contacting cutter smoothly.
Variable feed speed makes the machine ideal for cutting hard and soft wood.
Moulding Unit
The moulding units consists of two spindles.
One spindle is fixed, while the other spindle can be adjusted in height position.
The moulding unit is equipped with a seethru guard to prevent chips from splashing.
Boring Unit
The boring unit is driven by a 3 HP motor.
One 5-spindles boring head is standard equipment.
Other types of boring head are available upon request.The boring unit moves on high precision linear guide ways for smooth trowel and high linear accuracy.
Boring head stroke is adjustable.
Centralized Control Panel
All motion controls of the machine are completely centralized on a control panel, providing operational convenience for operator.
Table Driven by Servo (optional)
Upon customer's requirement, the table movement can be driven by a 1 kw servo motor. This combined with ball screw transmission to exhibit features of fast movement and high positioning accuracy.
Strokes per minute may reach 6 times. (Standard strokes per minute is 4 times)
🔻 YC-TF2 Specification
• Specifications and design characteristics are subject to change without prior notice.
Page updated
Google Sites
Report abuse